Category: Cars, Tech, DIY & Crafts

Tags: Car

After both new LED headlights are securely mounted and connected, carefully reposition the front grille. Align its plastic clips with the corresponding holes on the body and firmly press it back into place until you hear all clips snap home. Reinstall the Torx T15 screws along the top and the two 10mm bolts behind the bumper trim covers, then snap those covers back on. Reconnect the vehicle battery. The final, non-negotiable step is aiming your new headlights. Park your Jeep on level ground facing a wall about 25 feet away. The LED projectors will have a sharp horizontal cutoff line in their beam pattern. Using the adjustment screws on the top and side of each assembly (accessible from under the hood), adjust the beam so this cutoff line is at or slightly below the height of the headlight's center from the ground. This ensures maximum road illumination without blinding oncoming traffic.